Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ECO Window Systems Window Replacement: The Tamiami Owner’s Guide
We stock and install ECO Window Systems-compatible replacement windows across Tamiami, with typical installed pricing running $340 to $780 per opening depending on series, glazing package, and whether the original frame is preserved or replaced. Most ECO Window Systems replacements we measure in Tamiami are completed within two to three weeks from signed scope, with rush ordering available for failed impact units. Homeowners usually discover the problem after a storm when water tracks down the jamb, when the sash won’t lock flush anymore, or when they notice the spacer between glass panes has gone cloudy - the seal has failed, and the insulating gas is gone.
Which ECO Window Systems Models This Applies To
ECO Window Systems manufactures several product families, and the replacement approach differs by series. The ECO 5000 and ECO 7000 single-hung and horizontal-roller lines are the most common in Tamiami homes built between 2015 and 2022, identifiable by the etched ECO logo in the glass corner and a white adhesive label on the jamb listing the NOA number and manufacturing date. The ECO Tribute line, a thermally broken aluminum impact series, carries a thicker frame profile - roughly 3-1/4 inches versus the 2-7/8 inch standard - which affects rough-opening compatibility if you’re swapping the full frame rather than inserting into the existing.
We match OEM ECO Window Systems sashes, frames, and hardware where the series is still in production. For discontinued series, we source Miami-Dade NOA-approved equivalents from our verified lines, including PGT and CGI, that meet or exceed the original design pressure rating. One compatibility gotcha we see in Tamiami: early ECO 5000 units used a proprietary cam-lock spacing that does not interchange with the 2018 revision. We verify this on site with a physical sample before ordering. Sightline Windows & Doors Tamiami is an independent service provider, not affiliated with ECO Window Systems.
Signs Your ECO Window Systems Window Replacement Is Failing

- Condensation between glass panes that won’t wipe away. This indicates seal failure in the insulated glass unit, or IGU. The desiccant inside the spacer bar has saturated, and the low-E coating’s performance degrades once moisture enters - the unit needs replacement, not defogging.
- Sash drags or sticks in the track, especially after rain. The nylon roller assembly wears flat or the stainless track corrodes in the salt air common to Tamiami’s proximity to the Everglades boundary. We measure track width to the thousandth; ordering the wrong roller profile guarantees a return trip.
- Locking hardware won’t engage or pops back open. The multi-point lock mechanism fatigues from thermal cycling, or the keeper shifts as the frame settles. On ECO units, the keeper screw spacing is 3-1/2 inches center-to-center on post-2018 production, 3 inches on earlier - a spec we confirm before opening a hardware catalog.
- Visible frame separation at the corners or sill. Aluminum thermal-break frames can separate at the mechanical corners if the original crimp was insufficient or if repeated wind loading works the joint. This compromises both structural and water intrusion ratings.
- Draft or temperature stratification near the glass. The argon or krypton gas has leaked, and the center-of-glass U-factor has risen from the rated 0.30 to 0.45 or higher. A thermal camera confirms it; we document the reading for the customer record.
Before
AfterReplacement Cost & What’s Included
| Scope | Price Range (Tamiami) |
|---|---|
| IGU (glass-only) replacement, ECO 5000/7000 series | $340 - $520 |
| Full sash replacement with new hardware | $480 - $680 |
| Complete frame-out replacement, impact-rated | $620 - $780 |
| Custom geometric or oversized ECO unit | $740 - $1,100+ |
These ranges include the measured survey you keep, the written scope that becomes the invoice, removal and disposal of the failed unit, installation per Miami-Dade NOA, and the documented photo record on completion. What drives the spread: fixed versus operable sash, impact versus non-impact glazing, and whether the exterior stucco or siding needs touchwork. We pull permits when required and schedule inspection. Every replacement carries our 365-Day Done Right Promise under the Haven Standard - if the seal fails or the hardware malfunctions, we make it right. Call (786) 321-9118 to schedule your free measured survey; the written price arrives before any work starts.
DIY or Call Us?

An owner can safely inspect the label in the jamb, photograph the etched logo and any visible damage, and check the track for debris - we have seen units returned to smooth operation after clearing a single obstructing screw. Beyond that, ECO Window Systems replacement windows are not a practical DIY project in Tamiami. Impact-rated units weigh 40 to 60 pounds per sash; improper handling cracks the laminated glass or torques the frame out of square. The Miami-Dade NOA requires specific fastening patterns and sealant beads that vary by series and wall type; a missed fastener voids the windstorm certification and the permit. And the thermal-break frame must be squared and shimmed to maintain the designed sightline - the visible glass edge - or the sash won’t seal under pressure. We carry ECO-compatible hardware and common IGU sizes on our trucks, and Sonia Raman measures every opening herself before ordering. Measure it right, order it right, install it once.
FAQs
IGU seals typically last 12 to 18 years in South Florida’s high-humidity, high-UV environment, though units facing west or with dark exterior frames fatigue faster. The aluminum frame itself lasts indefinitely if anodized or properly coated; hardware and weatherstrip need attention at 8 to 12 years. Call (786) 321-9118 for an exact quote on your specific series - estimates are free.
Seal failure in an IGU cannot be repaired to original performance; the gas cannot be reintroduced reliably, and the low-E coating degrades with moisture exposure. Hardware, rollers, and weatherstrip are replaceable components that we service without full-unit replacement. We document what’s salvageable and what’s not during the measured survey.
A single IGU or sash replacement takes 90 minutes to two hours on site. A full frame-out replacement runs four to six hours per opening, plus stucco or trim touchwork. We schedule inspections before we leave; the customer receives the photo record and the final invoice, which matches the written scope, within 24 hours.
We stock common ECO 5000 and 7000 series sashes, IGUs, and hardware components on our trucks for Tamiami calls, with full-frame units ordered to measured spec with a two-to-three-week lead time. Rush ordering is available for failed impact units where the opening is compromised. Call (786) 321-9118 to confirm availability for your series and size.
Ready to price your ECO Window Systems replacement? Call (786) 321-9118 to schedule your free measured survey. You’ll receive the written price before any work starts, and the documented photo record when the job is done - that’s Haven Clause 1 and Haven Clause 4, and they’ve governed every one of our 18,000+ openings since 2012.
Written by Sonia Raman, Owner, Sightline Windows & Doors Tamiami at Sightline Windows & Doors Tamiami, serving Tamiami and nearby areas.










Before
After
Before
After
Before
After