Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Opa-locka, FL
Window installation in Opa-locka runs $650-$1,400 per opening for standard vinyl impact units and $1,200-$2,800 for aluminum or custom geometry, with most homes requiring 10-15 openings to complete. We measure every job under the Haven Standard, which means the written quote you receive before any work starts is the same document we use to fabricate and install. Call (786) 321-9118 to schedule your free measured survey.
Opa-locka’s housing stock poses problems that newer markets simply don’t face: mid-century concrete block homes with steel jalousie frames embedded in thick masonry, and a historic district where keyhole arches and horseshoe openings demand custom fabrication that still must clear Miami-Dade’s NOA certification. Our crews grind out original galvanized sub-frames daily, and we’ve documented every one of the 18,000+ openings we’ve touched since 2012.
Why Opa-locka Homes Are Different
Opa-locka sits at low elevation in Miami-Dade’s interior, fully inside the High-Velocity Hurricane Zone that mandates 175-mph-rated impact products and NOA certification for every window and exterior door. This is not Broward County one county north; the standard here is stricter, and inspectors enforce it.
The residential fabric is dominated by concrete block structure homes built from the 1940s through the 1970s, many still carrying original steel-framed jalousie or single-pane aluminum windows set into thick masonry walls. Removing these frames without cracking the surrounding block is a skill this market demands and others don’t. In the Glenn Curtiss-designed Moorish Revival historic district, keyhole arches, horseshoe-shaped openings, and non-rectangular window bays require fully custom-fabricated units that must simultaneously satisfy NOA requirements. Opa-locka is the rare market where custom geometry and maximum-stringency impact compliance must be solved together, and jalousie windows - louvered glass-slat units common in 1950s-60s CBS homes - provide zero hurricane protection and fail current code entirely.
Our Main Opa-locka Services
Most Opa-locka homeowners call us about two core needs: replacing failed original windows with impact-rated units, and upgrading entry doors to meet HVHZ code. Here is how we handle the work locally.
Window Replacement in Opa-locka
We replace original steel jalousie and single-pane aluminum units in Opa-locka’s mid-century CBS homes with NOA-certified impact windows, grinding out embedded galvanized sub-frames as standard demo. Every measured survey documents the existing frame depth, masonry condition, and any non-rectangular geometry before we quote. Window Replacement in Opa-locka is priced per opening with the written price locked before fabrication begins.
Impact Windows & Doors in Opa-locka
Every window and exterior door in Opa-locka must carry Miami-Dade NOA certification for 175-mph wind loads. We specify PGT, CGI, CWS, ES Windows, and ECO Window Systems by performance tier and price range, not by margin. The measured survey records your existing frame type, wall thickness, and any custom geometry so the quote matches the final invoice exactly. Impact Windows & Doors in Opa-locka includes full permit support and inspection scheduling.
Sliding & Patio Doors in Opa-locka
Opa-locka’s 1950s-70s patio openings were often built for lighter aluminum sliders that rattle in wind and leak in rain. We replace them with multi-point-lock impact-rated systems from PGT, CGI, and CWS, measuring the rough opening for square and level before quoting because settled CBS walls rarely are. Sliding & Patio Doors in Opa-locka includes new sill pans, flashing integration, and documented photo record on completion.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Opa-locka
Window installation in Opa-locka means working with mid-century concrete block walls, embedded steel frames, and the HVHZ requirement that every unit carry NOA certification. We see three conditions repeatedly: jalousie windows with galvanized sub-frames fused to masonry, single-pane aluminum sliders in out-of-square openings, and homes where the original frame depth doesn’t match modern impact units. Our Window Installation process starts with a measured survey you keep, and the written quote cannot differ from that document.
Single & Double Hung Windows
Signs you need it
Your existing jalousie or single-pane aluminum hung windows leak air, rattle in wind, or show corrosion at the sill where condensation pools against the block.
What it costs in Opa-locka
Single and double hung impact window installation in Opa-locka typically runs $650-$1,200 per opening for vinyl frames and $1,100-$1,900 for aluminum, with jalousie demo and sub-frame grinding adding $150-$300 per opening.
How we do it
We grind out the original steel sub-frame, inspect the masonry reveal for spalling, install a new pressure-treated buck if needed, set the NOA-certified unit with structural adhesive and tapcon fasteners, then seal with backer rod and urethane before documenting with photos.
Horizontal Roller Windows
Signs you need it
Your existing horizontal slider binds on the track, shows daylight at the meeting stile, or the rollers have collapsed from salt-air corrosion over decades.
What it costs in Opa-locka
Horizontal roller impact window installation in Opa-locka typically runs $750-$1,350 per opening for vinyl and $1,200-$2,100 for aluminum, with oversize openings in 1960s ranch homes pushing the upper end.
How we do it
We remove the existing frame including embedded fasteners, verify the rough opening width against the manufacturer’s allowable tolerance, shim the new roller unit to maintain proper sill slope for drainage, and test operation before sealing.
What Window Installation Costs in Opa-locka
| Item | Typical range in Opa-locka |
|---|---|
| Vinyl single/double hung impact window | $650 - $1,200 per opening |
| Aluminum single/double hung impact window | $1,100 - $1,900 per opening |
| Jalousie demo and sub-frame grinding | $150 - $300 per opening |
How long does window installation take in Opa-locka?
Most Opa-locka homes complete in 1-2 days for 10-15 openings, but jalousie demo with embedded steel sub-frames can add a half day. We schedule the measured survey, fabricate from that document, and arrive with verified crews. Call (786) 321-9118 for your timeline - estimates are free.
Do you handle permits for window installation in Opa-locka?
Yes, we pull Miami-Dade County permits for every window installation and schedule inspections; the permit cost is itemized in your written quote, not added later. Call (786) 321-9118 to review what your specific job requires.
Door Installation in Opa-locka
Door installation in Opa-locka must satisfy the same HVHZ and NOA requirements as windows, but with the added complexity of multi-point locking systems and the security expectations of homeowners replacing original 1950s slab doors. We measure the jamb depth, wall thickness, and floor levelness before quoting because CBS construction tolerances vary significantly across Opa-locka’s building eras. Our Door Installation includes the measured survey you keep and the written price before any work starts.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your existing front door shows daylight at the threshold, the jamb has separated from the block, or the single-point lock no longer engages flush with the strike.
What it costs in Opa-locka
Hurricane-proof front and entry door installation in Opa-locka typically runs $1,800-$3,500 for a standard 3/0 x 6/8 fiberglass or steel impact unit with multi-point hardware, with sidelite additions running $900-$1,600 per side.
How we do it
We remove the existing frame including any corroored fasteners embedded in the block, install a composite or aluminum sub-frame plumbed to the masonry, hang the NOA-certified door with adjustable hinges, adjust the multi-point lock for even engagement, and flash the exterior with integrated sill pan and head flashing.
French & Double Doors
Signs you need it
Your existing French doors leak at the astragal, the inactive panel has dropped and binds, or the original aluminum frame transmits heat and cold equally.
What it costs in Opa-locka
French and double door installation in Opa-locka typically runs $2,400-$4,200 for a 6/0 x 6/8 impact-rated pair with multi-point locking, with wider custom widths for 1960s ranch openings pushing $5,000-$7,500.
How we do it
We verify the rough opening is square within 1/4 inch across the diagonal, install a reinforced sub-frame with structural anchors at 16 inches on center, hang both panels with adjustable hinges, align the astragal for smooth operation, and test the multi-point engagement before sealing.
What Door Installation Costs in Opa-locka
| Item | Typical range in Opa-locka |
|---|---|
| Hurricane-proof front/entry door (standard size) | $1,800 - $3,500 |
| Entry door sidelite (per side) | $900 - $1,600 |
| French/double door pair (standard width) | $2,400 - $4,200 |
Can you match my existing door size in Opa-locka?
Yes, we measure the existing rough opening and specify from Therma-Tru and other manufacturer lines by what the opening requires, not by stock availability. Non-standard sizes are documented in the measured survey and priced before fabrication. Call (786) 321-9118 to schedule.
Do French doors in Opa-locka need impact glass?
Yes, all exterior doors in Opa-locka must carry NOA certification and impact-rated glazing; we specify laminated glass from PGT, CGI, or CWS with documented performance values. Call (786) 321-9118 for specification details on your opening.
Energy-Efficient Windows in Opa-locka
Energy-efficient windows in Opa-locka face a specific challenge: the original single-pane aluminum and jalousie units common in 1950s-70s CBS homes conduct heat directly into the block wall, and the lack of effective glazing means air conditioning runs continuously against solar gain. We specify low-E coatings, argon gas fill, and insulated laminated glass from ECO Window Systems and other lines by U-factor and SHGC performance, not by brand preference. Our Energy-Efficient Windows process documents the existing frame condition and orientation-specific heat load before recommending a specification.
Low-E & Argon Gas Glass
Signs you need it
Your existing windows show condensation between panes or on the interior surface, or your summer electric bills spike despite the AC running continuously.
What it costs in Opa-locka
Low-E and argon gas glass upgrade in Opa-locka typically adds $80-$150 per opening to the base impact window price, with dual-pane low-E/argon units running $730-$1,350 for vinyl and $1,180-$2,050 for aluminum frames.
How we do it
We measure each opening’s solar heat gain coefficient requirement by orientation, specify low-E coating and argon fill from the manufacturer’s documented performance tables, and verify the sealed unit’s air space dimension at installation with a digital caliper.
Insulated Laminated Glass
Signs you need it
Your home faces west or south with unshaded exposure, the interior flooring and furnishings show UV fading, or you need both impact protection and thermal performance in one unit.
What it costs in Opa-locka
Insulated laminated glass in Opa-locka typically runs $950-$1,650 per opening for vinyl frames and $1,450-$2,400 for aluminum, combining the air space of dual-pane construction with the impact resistance of laminated outer lites.
How we do it
We specify the laminated lite on the exterior with a low-E coated inner lite, measure the completed unit weight against the frame’s structural rating, and verify the warm-edge spacer placement before sealing to prevent thermal bridging.
What Energy-Efficient Windows Costs in Opa-locka
| Item | Typical range in Opa-locka |
|---|---|
| Low-E/argon upgrade (add to base window) | $80 - $150 per opening |
| Dual-pane low-E/argon vinyl impact window | $730 - $1,350 per opening |
| Insulated laminated glass vinyl impact window | $950 - $1,650 per opening |
Will energy-efficient windows lower my electric bill in Opa-locka?
Yes, replacing single-pane aluminum or jalousie units with low-E/argon impact windows typically reduces cooling load significantly in Opa-locka’s CBS homes, though exact savings depend on orientation, shading, and existing insulation. We document the before condition and specify by performance values. Call (786) 321-9118 for a measured survey.
Do energy-efficient windows still meet impact code in Opa-locka?
Yes, all energy-efficient windows we install in Opa-locka carry Miami-Dade NOA certification; the low-E coating and argon fill are added to laminated impact-rated glass, not substituted for it. Call (786) 321-9118 to review the specification for your opening.
Impact Garage Doors in Opa-locka
Impact garage doors in Opa-locka are governed by the same HVHZ requirements as windows and entry doors, but with the added complexity of wind-load testing for the largest opening in most homes. Original 1950s-70s garage doors in Opa-locka’s CBS homes were built for lightweight non-impact panels with minimal track anchoring to the block header, and many have never been upgraded to meet post-Andrew standards. Our Impact Garage Doors service includes structural assessment of the header and jambs, not just panel replacement.
Hurricane-Rated Garage Doors
Signs you need it
Your existing garage door flexes visibly in wind, the track pulls away from the header, or the opener strains to lift a door that was never designed for the weight of impact-rated panels.
What it costs in Opa-locka
Hurricane-rated garage door installation in Opa-locka typically runs $1,600-$3,200 for a standard 16×7 single-car or double-car steel impact door with reinforced track and heavy-duty hardware, with custom widths for non-standard 1960s openings adding $400-$800.
How we do it
We inspect the block header for cracks or inadequate embedment of the original track fasteners, install a reinforced steel or engineered wood header if needed, mount the wind-rated track with expansion anchors at engineered spacing, and hang the impact-rated door with calibrated spring tension for the increased panel weight.
Wind-Load Code Compliance
Signs you need it
Your garage door failed inspection during a home sale, your insurance renewal requires documentation of HVHZ compliance, or the existing door has no Miami-Dade NOA label visible.
What it costs in Opa-locka
Wind-load code compliance verification and upgrade in Opa-locka typically runs $1,200-$2,800 if the existing track and header can be retained, and $2,200-$4,500 if structural reinforcement is required for full NOA compliance.
How we do it
We photograph the existing installation, verify the door’s NOA status against Miami-Dade’s online database, test the track attachment with a torque wrench, and provide a written scope with either a retrofit path or full replacement recommendation priced before work begins.
What Impact Garage Doors Costs in Opa-locka
| Item | Typical range in Opa-locka |
|---|---|
| Hurricane-rated garage door (standard 16×7) | $1,600 - $3,200 |
| Custom width surcharge (non-standard opening) | $400 - $800 |
| Wind-load compliance with structural reinforcement | $2,200 - $4,500 |
Does my garage door need to be impact-rated in Opa-locka?
Yes, all exterior doors including garage doors in Opa-locka’s HVHZ zone must carry Miami-Dade NOA certification for 175-mph wind loads; non-compliant doors are flagged in home sales and insurance renewals. We verify compliance and provide written scope. Call (786) 321-9118 for inspection.
Can you reuse my garage door opener with an impact door?
Sometimes, but impact-rated panels add significant weight that often exceeds the original opener’s rated capacity; we test the existing unit and specify replacement if the duty cycle or lifting force is inadequate. Call (786) 321-9118 to schedule evaluation.
Custom & Geometric Windows in Opa-locka
Custom and geometric windows in Opa-locka present a problem found almost nowhere else in the United States: the Glenn Curtiss Moorish Revival historic district requires keyhole arches, horseshoe openings, and non-rectangular bays that must be fabricated to shape while still satisfying Miami-Dade’s NOA certification, the strictest hurricane-glazing standard in the nation. We have solved this combination repeatedly, documenting the sightline measurements and radius calculations in the measured survey you keep. Our Custom & Geometric Windows service specifies from ViewLux and other lines by what the opening geometry demands.
Arched & Curved Windows
Signs you need it
Your historic home or civic building features a keyhole arch, horseshoe opening, or segmented radius that standard rectangular units cannot fill without destroying the architectural character.
What it costs in Opa-locka
Arched and curved window installation in Opa-locka typically runs $2,200-$4,500 per opening for custom-fabricated impact-rated units with radius frames, with complex multi-radius Moorish Revival geometries pushing $5,000-$8,500 depending on fabrication complexity.
How we do it
We take sightline measurements at multiple points along the radius, verify the frame extrusion can be rolled to the specified curve without compromising the impact rating, fabricate from the measured survey document, and install with custom jamb extensions to match the masonry reveal depth.
Geometric & Shaped Windows
Signs you need it
Your home features triangular gable windows, trapezoid transoms, or other non-rectangular geometries that stock window catalogs do not include, particularly in mid-century modern or custom-built Opa-locka homes.
What it costs in Opa-locka
Geometric and shaped window installation in Opa-locka typically runs $1,800-$3,800 per opening for standard polygons with impact-rated glazing, with compound angles or integrated transom combinations running $3,200-$6,000.
How we do it
We measure every angle with a digital protractor, verify the glazing pattern against the manufacturer’s NOA-approved configurations, fabricate the frame and sash as a single integrated unit, and install with shimming that accounts for the non-uniform weight distribution of shaped glass.
What Custom & Geometric Windows Costs in Opa-locka
| Item | Typical range in Opa-locka |
|---|---|
| Arched/curved window (single radius) | $2,200 - $4,500 per opening |
| Complex Moorish Revival multi-radius | $5,000 - $8,500 per opening |
| Geometric/shaped window (standard polygon) | $1,800 - $3,800 per opening |
Can custom windows still be impact-rated in Opa-locka?
Yes, but only when fabricated from NOA-certified extrusions and glazing patterns by manufacturers with approved custom capabilities; we verify every radius and angle against Miami-Dade’s database before quoting. Call (786) 321-9118 for specification review.
How do you measure a curved window in Opa-locka?
We take chord and rise measurements at multiple points, verify the radius consistency, and document everything in the measured survey you keep; the fabrication shop builds from this document, not from a template. Call (786) 321-9118 to schedule.
Brands We Service in Opa-locka
We install and service eight manufacturer lines in Opa-locka - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by performance tier and price range, not by margin. Common hardware, weatherstrip, and glazing components are stocked locally for faster turnaround on repairs and replacements. our brands page lists full specifications and NOA documentation.
Pricing for Windows & Doors in Opa-locka, FL
| Service | Typical range in Opa-locka |
|---|---|
| Vinyl single/double hung impact window | $650 - $1,200 per opening |
| Aluminum single/double hung impact window | $1,100 - $1,900 per opening |
| Horizontal roller impact window (vinyl) | $750 - $1,350 per opening |
| Jalousie demo and sub-frame grinding | $150 - $300 per opening |
| Hurricane-proof front/entry door | $1,800 - $3,500 |
| Entry door sidelite (per side) | $900 - $1,600 |
| French/double door pair (standard) | $2,400 - $4,200 |
| Dual-pane low-E/argon vinyl impact window | $730 - $1,350 per opening |
| Insulated laminated glass vinyl impact window | $950 - $1,650 per opening |
| Hurricane-rated garage door (16×7) | $1,600 - $3,200 |
| Wind-load compliance with reinforcement | $2,200 - $4,500 |
| Geometric/shaped window (standard polygon) | $1,800 - $3,800 per opening |
Three factors push price up in Opa-locka: embedded steel jalousie sub-frames requiring grinding, non-standard masonry reveals from 1950s-70s CBS construction, and custom geometries in the historic district that must be fabricated to shape while maintaining NOA certification. The Haven Standard means your written quote includes every one of these conditions if we found them in the measured survey; nothing is added after work starts.
Neighborhoods We Serve in Opa-locka
Our crews work throughout Opa-locka’s residential areas, from the mid-century concrete block neighborhoods near Magnolia North to the historic district around Ali Baba Avenue and the commercial corridors along NW 27th Avenue. Dispatch and scheduling are coordinated from our Miami office; most Opa-locka appointments are available within a few business days of the initial call.
- Magnolia North
- Opa-locka Historic District (Moorish Revival core)
- Triangle
- Rolling Oaks
- Sherbondy Village
Service Area - Cities Near Opa-locka
We install and replace windows and doors across Miami-Dade County and serve homeowners in Tamiami, FL, University Park, FL, Westchester, FL, and Olympia Heights, FL from the same measured-survey and documented-photo process. Every job is governed by the Haven Standard regardless of location.
Serving Opa-locka, FL - Our Local Coverage Area
We’re based in the Opa-locka area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Opa-locka
Yes, we pull Miami-Dade County permits for every window and door installation in Opa-locka and schedule required inspections; the permit cost is itemized in your written quote before work starts, not added as a surprise.
We answer calls live 24/7 and typically schedule measured surveys within a few business days for Opa-locka; fabrication and installation follow once the written quote is approved. Call (786) 321-9118 to check current availability.
Yes, we specialize in the custom geometric and arched openings found in Opa-locka’s Glenn Curtiss Moorish Revival district, fabricating impact-rated units that satisfy both the architectural review requirements and Miami-Dade’s strict NOA certification.
Call (786) 321-9118 to schedule your free measured survey. Every quote is written before any work starts, every crew is verified and uniformed, and every completed job leaves a documented photo record under the Haven Standard.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Opa-locka Customers Say
"The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Good crew, tidy install, finished a day early. Paperwork had the license number on it."
- Barry L."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.